Sun Feb 3 2008

F-705 Rear spar bulkhead work

Not much progress tonight. I deburred the F-705K spacers for the seat adjustment slots. The spacers are supposed to be 1/2 inch wide, but the one on the top is about 1/32 inch too narrow. Should be OK.

I trimmed the ends of the F-705Cs. The left one (shown here) came out perfect. The right one shifted in the saw, so by the time I squared it up with the sander, it was about 1/32 inch short. I also deburred the holes in F-705B and the two F-705Cs.