This might not seem like a big deal, but I spent several days sorting through all my hardware, adding the stuff that came with the finishing and firewall forward kits, and relabeling all the containers. It was time consuming, but the results are good.

I had previously noticed that I slotted the wrong hole on the fuel selector cover. I should have slotted the bottom one, but slotted the top. It only took a few minutes and I filed the correct holes into a slot.

Afterwards, I bent the fuel line going from the pump to the firewall. I'm not sure where the firewall penetration is supposed to be, so I haven't drilled that hole yet.